如何修复VPN 错误87：参数错误

如何修复VPN 错误87：参数错误

Error: (9012, 87) "An error is preventing the VPN from connecting. Reference error ID 87"

To fix this problem, uninstall and reinstall WAN Miniport drivers.

STEP 1

UNINSTALL AND REINSTALL WAN MINIPORT DRIVERS

Press the Windows + R keys to open the Run dialog box.Type in the following text, and then press Enter.devmgmt.mscIn the Device Manager window, double-click Network adapters to expand it.Under Network adapters, double click WAN Miniport drivers (IKEv2) to open driver properties.If you cannot find WAN Miniport drivers (IKEv2) under Network adapter, from the top menu bar, click View > Show hidden devices.On the Driver tab, click Uninstall or Uninstall Device.Follow the on-screen instructions.Repeat lines 4 to 6 to remove the following drivers:Follow the on-screen instructions and remove the WAN Miniport and TAP drivers.

WAN Miniport drivers (IP)WAN Miniport drivers (IPv6)Symantec TAP driver (if present)

In the Device Manager window, from the top toolbar, click Action and then click Scan for hardware changes.Follow the on-screen instructions to install WAN Miniport device drivers.After the device driver installation is complete, you can start Norton and turn on Secure VPN. If the problem persists, go to Step 2.

STEP 2

RESET NETWORK ADAPTER AND TCP/IP STACK

Press the Windows + R keys to open the Run dialog box.Type in the following text, and then press Enter.cmdIn the Command Prompt window, type the following and press Enter:netsh winsock resetWhen the Winsock reset is complete, the message "Winsock reset completed successfully" appears in the Command Prompt window.In the Command Prompt window, type the following and press Enter:netsh int ipv4 resetIf you use IPV6, type the following command and press Enter:netsh int ipv6 resetExit all programs and restart your computer.

The solution made it easy for me to handle my issue.

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。