用Visual studio2012在Windows8上开发内核驱动监视进程创建

用Visual studio2012在Windows8上开发内核驱动监视进程创建

在Windows NT中，80386保护模式的“保护”比Windows 95中更坚固，这个“镀金的笼子”更加结实，更加难以打破。在Windows 95中，至少应用程序I/O操作是不受限制的，而在Windows NT中，我们的应用程序连这点权限都被剥夺了。在NT中几乎不太可能进入真正的ring0层。

在Windows NT中，存在三种Device Driver：

1．“Virtual device Driver” (VDD)。通过VDD，16位应用程序，如DOS 和Win16应用程序可以访问特定的I/O端口（注意，不是直接访问，而是要通过VDD来实现访问）。

2．“GDI Driver”，提供显示和打印所需的GDI函数。

3．“Kernel Mode Driver”，实现对特定硬件的操作，比如说CreateFile, CloseHandle (对于文件对象而言), ReadFile, WriteFile, DeviceIoControl 等操作。“Kernel Mode Driver”还是Windows NT中唯一可以对硬件中断和DMA进行操作的Driver。SCSI 小端口驱动和 网卡NDIS 驱动都是Kernel Mode Driver的一种特殊形式。

Visual studio2012与Windows8带来格外不同的新体验

1.启动Vs2012

2.看见满目的驱动开发模板

3.选择一个驱动模式，有内核模式与用户模式两种的驱动

4.创建一个驱动程序，KMDF DriverMVP

5.我们选择的是内核模式的驱动程序，下面是创建成功后的界面，分别是驱动程序本身，与驱动安装包

6.按下F5，选择驱动编译，

插入下列代码实现内核的进程创建

#include "ProcMon.h"#include "../inc/ioctls.h"////////// 全局变量//PDEVICE_OBJECT g_pDeviceObject;////////// 函数实现//NTSTATUSDriverEntry( IN PDRIVER_OBJECT DriverObject, IN PUNICODE_STRING RegistryPath){ NTSTATUS Status = STATUS_SUCCESS; UNICODE_STRING ntDeviceName; UNICODE_STRING dosDeviceName; UNICODE_STRING ProcessEventString; PDEVICE_EXTENSION deviceExtension; PDEVICE_OBJECT deviceObject = NULL; KdPrint(("[ProcMon] DriverEntry: %wZ\n", RegistryPath)); // // 创建设备对象 // RtlInitUnicodeString(&ntDeviceName, PROCMON_DEVICE_NAME_W); Status = IoCreateDevice( DriverObject, sizeof(DEVICE_EXTENSION), // DeviceExtensionSize &ntDeviceName, // DeviceName FILE_DEVICE_PROCMON, // DeviceType 0, // DeviceCharacteristics TRUE, // Exclusive &deviceObject // [OUT] ); if(!NT_SUCCESS(Status)) { KdPrint(("[ProcMon] IoCreateDevice Error Code = 0x%X\n", Status)); return Status; } // // 设置扩展结构 // deviceExtension = (PDEVICE_EXTENSION)deviceObject->DeviceExtension; // // Set up synchronization objects, state info,, etc. // deviceObject->Flags |= DO_BUFFERED_IO; // // 创建符号链接 // RtlInitUnicodeString(&dosDeviceName, PROCMON_DOS_DEVICE_NAME_W); Status = IoCreateSymbolicLink(&dosDeviceName, &ntDeviceName); if(!NT_SUCCESS(Status)) { KdPrint(("[ProcMon] IoCreateSymbolicLink Error Code = 0x%X\n", Status)); IoDeleteDevice(deviceObject); return Status; } // // 分发IRP // DriverObject->MajorFunction[IRP_MJ_CREATE] = ProcmonDispatchCreate; DriverObject->MajorFunction[IRP_MJ_CLOSE] = ProcmonDispatchClose; DriverObject->MajorFunction[IRP_MJ_DEVICE_CONTROL] = ProcmonDispatchDeviceControl; DriverObject->DriverUnload = ProcmonUnload; // // 保存设备对象指针 // g_pDeviceObject = deviceObject; // // 创建事件对象与应用层通信 // RtlInitUnicodeString(&ProcessEventString, EVENT_NAME); deviceExtension->ProcessEvent = IoCreateNotificationEvent(&ProcessEventString, &deviceExtension->hProcessHandle); KeClearEvent(deviceExtension->ProcessEvent); // 非受信状态 // // 设置回调例程 // Status = PsSetCreateProcessNotifyRoutine(ProcessCallback, FALSE); return Status;}NTSTATUSProcmonDispatchCreate( IN PDEVICE_OBJECT DeviceObject, IN PIRP Irp){ NTSTATUS Status = STATUS_SUCCESS; Irp->IoStatus.Information = 0; KdPrint(("[ProcMon] IRP_MJ_CREATE\n")); Irp->IoStatus.Status = Status; IoCompleteRequest(Irp, IO_NO_INCREMENT); return Status;}NTSTATUSProcmonDispatchClose( IN PDEVICE_OBJECT DeviceObject, IN PIRP Irp){ NTSTATUS Status = STATUS_SUCCESS; Irp->IoStatus.Information = 0; KdPrint(("[ProcMon] IRP_MJ_CLOSE\n")); Irp->IoStatus.Status = Status; IoCompleteRequest(Irp, IO_NO_INCREMENT); return Status;}NTSTATUSProcmonDispatchDeviceControl( IN PDEVICE_OBJECT DeviceObject, IN PIRP Irp){ NTSTATUS Status = STATUS_SUCCESS; PIO_STACK_LOCATION irpStack; PDEVICE_EXTENSION deviceExtension; ULONG inBufLength, outBufLength; ULONG ioControlCode; PCALLBACK_INFO pCallbackInfo; // 获取当前设备栈 irpStack = IoGetCurrentIrpStackLocation(Irp); deviceExtension = (PDEVICE_EXTENSION)DeviceObject->DeviceExtension; // 提取信息 pCallbackInfo = Irp->AssociatedIrp.SystemBuffer; inBufLength = irpStack->Parameters.DeviceIoControl.InputBufferLength; outBufLength = irpStack->Parameters.DeviceIoControl.OutputBufferLength; ioControlCode = irpStack->Parameters.DeviceIoControl.IoControlCode; // 处理不同的IOCTL switch (ioControlCode) { case IOCTL_PROC_MON: { KdPrint(("[ProcMon] IOCTL: 0x%X", ioControlCode)); if (outBufLength >= sizeof(PCALLBACK_INFO)) { pCallbackInfo->hParentId = deviceExtension->hParentId; pCallbackInfo->hProcessId = deviceExtension->hProcessId; pCallbackInfo->bCreate = deviceExtension->bCreate; Irp->IoStatus.Information = outBufLength; } break; } default: { Status = STATUS_INVALID_PARAMETER; Irp->IoStatus.Information = 0; KdPrint(("[ProcMon] Unknown IOCTL: 0x%X (%04X,%04X)", \ ioControlCode, DEVICE_TYPE_FROM_CTL_CODE(ioControlCode), \ IoGetFunctionCodeFromCtlCode(ioControlCode))); break; } } Irp->IoStatus.Status = Status; IoCompleteRequest(Irp, IO_NO_INCREMENT); return Status;}VOIDProcmonUnload( IN PDRIVER_OBJECT DriverObject){ UNICODE_STRING dosDeviceName; // // Free any resources // // 卸载回调例程 PsSetCreateProcessNotifyRoutine(ProcessCallback, TRUE); // // Delete the symbolic link // RtlInitUnicodeString(&dosDeviceName, PROCMON_DOS_DEVICE_NAME_W); IoDeleteSymbolicLink(&dosDeviceName); // // Delete the device object // IoDeleteDevice(DriverObject->DeviceObject); KdPrint(("[ProcMon] Unloaded"));}VOIDProcessCallback( IN HANDLE ParentId, // 父进程ID IN HANDLE ProcessId, // 发生事件的进程ID IN BOOLEAN Create // 进程是创建还是终止){ PDEVICE_EXTENSION deviceExtension = (PDEVICE_EXTENSION)g_pDeviceObject->DeviceExtension; deviceExtension->hParentId = ParentId; deviceExtension->hProcessId = ProcessId; deviceExtension->bCreate = Create; // 触发事件，通知应用程序 KeSetEvent(deviceExtension->ProcessEvent, 0, FALSE); KeClearEvent(deviceExtension->ProcessEvent);}////

ring3实现应用层的调用，搞定进程创建的监视

#include "windows.h"#include "winioctl.h"#include "stdio.h"#include "../inc/ioctls.h"#define SYMBOL_LINK "\\\\.\\ProcMon"//#define SYMBOL_LINK "\\\\.\\slNTProcDrv"int main(){ CALLBACK_INFO cbkinfo, cbktemp = {0}; // 打开驱动设备对象 HANDLE hDriver = ::CreateFile( SYMBOL_LINK, GENERIC_READ | GENERIC_WRITE, 0, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL); if (hDriver == INVALID_HANDLE_VALUE) { printf("打开驱动设备对象失败！\n"); return -1; } // 打开内核事件对象 HANDLE hProcessEvent = ::OpenEventW(SYNCHRONIZE, FALSE, EVENT_NAME); while (::WaitForSingleObject(hProcessEvent, INFINITE)) { DWORD dwRet; BOOL bRet; bRet = ::DeviceIoControl( hDriver, IOCTL_PROC_MON, NULL, 0, &cbkinfo, sizeof(cbkinfo), &dwRet, NULL); if (bRet) { if (cbkinfo.hParentId != cbktemp.hParentId || \ cbkinfo.hProcessId != cbktemp.hProcessId || \ cbkinfo.bCreate != cbktemp.bCreate) { if (cbkinfo.bCreate) { printf("有进程被创建，PID = %d\n", cbkinfo.hProcessId); } else { printf("有进程被终止，PID = %d\n", cbkinfo.hProcessId); } cbktemp = cbkinfo; } } else { printf("\n获取进程信息失败！\n"); break; } } ::CloseHandle(hDriver); return 0;}

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。