一个Python程序使用OpenCV从Raspberry Pi的PiCamera视频中检测和识别扑克牌

一个python程序使用OpenCV从Raspberry Pi的PiCamera视频中检测和识别扑克牌

OpenCV-Playing-Card-Detector

This is a Python program that uses OpenCV to detect and identify playing cards from a PiCamera video feed on a Raspberry Pi. Check out the YouTube video that describes what it does and how it works:

https://youtube.com/watch?v=m-QPjO-2IkA

Usage

Download this repository to a directory and run CardDetector.py from that directory. Cards need to be placed on a dark background for the detector to work. Press 'q' to end the program.

The program was originally designed to run on a Raspberry Pi with a Linux OS, but it can also be run on Windows 7/8/10. To run on Windows, download and install Anaconda (https://anaconda.com/download/, Python 3.6 version), launch Anaconda Prompt, and execute the program by launching IDLE (type "idle" and press ENTER in the prompt) and opening/running the CardDetector.py file in IDLE. The Anaconda environment comes with the opencv and numpy packages installed, so you don't need to install those yourself. If you are running this on Windows, you will also need to change the program to use a USB camera, as described below.

The program allows you to use either a PiCamera or a USB camera. If using a USB camera, change line 38 in CardDetector.py to:

videostream = VideoStream.VideoStream((IM_WIDTH,IM_HEIGHT),FRAME_RATE,2,0).start()

The card detector will work best if you use isolated rank and suit images generated from your own cards. To do this, run Rank_Suit_Isolator.py to take pictures of your cards. It will ask you to take a picture of an Ace, then a Two, and so on. Then, it will ask you to take a picture of one card from each of the suits (Spades, Diamonds, Clubs, Hearts). As you take pictures of the cards, the script will automatically isolate the rank or suit and save them in the Card_Imgs directory (overwriting the existing images).

Files

CardDetector.py contains the main script

Cards.py has classes and functions that are used by CardDetector.py

PiVideoStream.py creates a video stream from the PiCamera, and is used by CardDetector.py

Rank_Suit_Isolator.py is a standalone script that can be used to isolate the rank and suit from a set of cards to create train images

Card_Imgs contains all the train images of the card ranks and suits

Dependencies

Python 3.6

OpenCV-Python 3.2.0 and numpy 1.8.2: See https://pyimagesearch.com/2016/04/18/install-guide-raspberry-pi-3-raspbian-jessie-opencv-3/ for how to build and install OpenCV-Python on the Raspberry Pi

picamera library:

sudo apt-get updatesudo apt-get install python-picamera python3-picamera

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。