uftrace工具是跟踪和分析以C/C ++编写的程序的执行

uftrace工具是跟踪和分析以C/C ++编写的程序的执行

uftrace

The uftrace tool is to trace and analyze execution of a program written in C/C++. It was heavily inspired by the ftrace framework of the Linux kernel (especially function graph tracer) and supports userspace programs. It supports various kind of commands and filters to help analysis of the program execution and performance.

Homepage: https://github.com/namhyung/uftraceTutorial: https://github.com/namhyung/uftrace/wiki/TutorialChat: https://gitter.im/uftrace/uftraceMailing list: uftrace@googlegroups.com

Features

It traces each function in the executable and shows time duration. It can also trace external library calls - but usually entry and exit are supported. Optionally it's possible to trace other (nested) external library calls and/or internal function calls in the library call.

It can show detailed execution flow at function level, and report which function has the highest overhead. And it also shows various information related the execution environment.

You can setup filters to exclude or include specific functions when tracing. In addition, it can save and show function arguments and return value.

It supports multi-process and/or multi-threaded applications. With root privilege, it can also trace kernel functions as well( with -k option) if the system enables the function graph tracer in the kernel (CONFIG_FUNCTION_GRAPH_TRACER=y).

How to build and install uftrace

On Linux distros, misc/install-deps.sh installs required software(s) on your system. Those are for optional advanced features but highly recommend to install them together.

$ sudo misc/install-deps.sh

Once you installed required software(s) on your system, it can be built and installed like following:

$ ./configure$ make$ sudo make install

For more advanced setup, please refer INSTALL.md file.

How to use uftrace

The uftrace command has following subcommands:

record : runs a program and saves the trace datareplay : shows program execution in the trace datareport : shows performance statistics in the trace datalive : does record and replay in a row (default)info : shows system and program info in the trace datadump : shows low-level trace datarecv : saves the trace data from networkgraph : shows function call graph in the trace datascript : runs a script for recorded trace datatui : show text user interface for graph and report

You can use -h, -? or --help option to see available commands and options.

$ uftraceUsage: uftrace [OPTION...] [record|replay|live|report|info|dump|recv|graph|script|tui] []Try `uftrace --help' or `uftrace --usage' for more information.

If omitted, it defaults to the live command which is almost same as running record and replay subcommand in a row (but does not record the trace info to files).

For recording, the executable needs to be compiled with the -pg (or -finstrument-functions) option which generates profiling code (calling mcount or __cyg_profile_func_enter/exit) for each function.

Note that, there's an experimental support for dynamic tracing on x86_64 and AArch64(ARM64) which doesn't require such (re-)compilations. Also recent compilers have some options to help uftrace to reduce tracing overhead with similar way (although it still needs recompilation of your program). Please see dynamic tracing section for more details.

$ uftrace tests/t-abc# DURATION TID FUNCTION 16.134 us [ 1892] | __monstartup(); 223.736 us [ 1892] | __cxa_atexit(); [ 1892] | main() { [ 1892] | a() { [ 1892] | b() { [ 1892] | c() { 2.579 us [ 1892] | getpid(); 3.739 us [ 1892] | } /* c */ 4.376 us [ 1892] | } /* b */ 4.962 us [ 1892] | } /* a */ 5.769 us [ 1892] | } /* main */

For more analysis, you'd be better recording it first so that it can run analysis commands like replay, report, graph, dump and/or info multiple times.

$ uftrace record tests/t-abc

It'll create uftrace.data directory that contains trace data files. Other analysis commands expect the directory exists in the current directory, but one can use another using -d option.

The replay command shows execution information like above. As you can see, the t-abc is a very simple program merely calls a, b and c functions. In the c function it called getpid() which is a library function implemented in the C library (glibc) on normal systems - the same goes to __cxa_atexit().

Users can use various filter options to limit functions it records/prints. The depth filter (-D option) is to omit functions under the given call depth. The time filter (-t option) is to omit functions running less than the given time. And the function filters (-F and -N options) are to show/hide functions under the given function.

The -k option enables to trace kernel functions as well (needs root access). With the classic hello world program, the output would look like below (Note, I changed it to use fprintf() with stderr rather than the plain printf() to make it invoke system call directly):

$ sudo uftrace -k tests/t-helloHello world# DURATION TID FUNCTION 1.365 us [21901] | __monstartup(); 0.951 us [21901] | __cxa_atexit(); [21901] | main() { [21901] | fprintf() { 3.569 us [21901] | __do_page_fault(); 10.127 us [21901] | sys_write(); 20.103 us [21901] | } /* fprintf */ 21.286 us [21901] | } /* main */

You can see the page fault handler and the write syscall handler were called inside the fprintf() call.

Also it can record and show function arguments and return value with -A and -R options respectively. The following example records first argument and return value of 'fib' (fibonacci number) function.

$ uftrace record -A fib@arg1 -R fib@retval tests/t-fibonacci 5$ uftrace replay# DURATION TID FUNCTION 2.853 us [22080] | __monstartup(); 2.194 us [22080] | __cxa_atexit(); [22080] | main() { 2.706 us [22080] | atoi(); [22080] | fib(5) { [22080] | fib(4) { [22080] | fib(3) { 7.473 us [22080] | fib(2) = 1; 0.419 us [22080] | fib(1) = 1; 11.452 us [22080] | } = 2; /* fib */ 0.460 us [22080] | fib(2) = 1; 13.823 us [22080] | } = 3; /* fib */ [22080] | fib(3) { 0.424 us [22080] | fib(2) = 1; 0.437 us [22080] | fib(1) = 1; 2.860 us [22080] | } = 2; /* fib */ 19.600 us [22080] | } = 5; /* fib */ 25.024 us [22080] | } /* main */

The report command lets you know which function spends the longest time including its children (total time).

$ uftrace report Total time Self time Calls Function ========== ========== ========== ==================================== 25.024 us 2.718 us 1 main 19.600 us 19.600 us 9 fib 2.853 us 2.853 us 1 __monstartup 2.706 us 2.706 us 1 atoi 2.194 us 2.194 us 1 __cxa_atexit

The graph command shows function call graph of given function. In the above example, function graph of function 'main' looks like below:

$ uftrace graph main# Function Call Graph for 'main' (session: 073f1e84aa8b09d3)=============== BACKTRACE =============== backtrace #0: hit 1, time 25.024 us [0] main (0x40066b)========== FUNCTION CALL GRAPH ========== 25.024 us : (1) main 2.706 us : +-(1) atoi : | 19.600 us : +-(1) fib 16.683 us : (2) fib 12.773 us : (4) fib 7.892 us : (2) fib

The dump command shows raw output of each trace record. You can see the result in the chrome browser, once the data is processed with uftrace dump --chrome. Below is a trace of clang (LLVM) compiling a small C++ template metaprogram.

It also supports flame-graph output as well. The data can be processed with uftrace dump --flame-graph and passed to flamegraph.pl. Below is a flame graph result of gcc compiling a simple C program.

The info command shows system and program information when recorded.

$ uftrace info# system information# ==================# program version : uftrace v0.8.1# recorded on : Tue May 24 11:21:59 2016# cmdline : uftrace record tests/t-abc # cpu info : Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz# number of cpus : 12 / 12 (online / possible)# memory info : 20.1 / 23.5 GB (free / total)# system load : 0.00 / 0.06 / 0.06 (1 / 5 / 15 min)# kernel version : Linux 4.5.4-1-ARCH# hostname : sejong# distro : "Arch Linux"## process information# ===================# number of tasks : 1# task list : 5098# exe image : /home/namhyung/project/uftrace/tests/t-abc# build id : a3c50d25f7dd98dab68e94ef0f215edb06e98434# exit status : exited with code: 0# elapsed time : 0.003219479 sec# cpu time : 0.000 / 0.003 sec (sys / user)# context switch : 1 / 1 (voluntary / involuntary)# max rss : 3072 KB# page fault : 0 / 172 (major / minor)# disk iops : 0 / 24 (read / write)

The script command allows user to run a custom script on a data recorded. The supported script types are Python 2.7 and Lua 5.1 as of now.

The tui command is for interactive text-based user interface using ncurses. It provides basic functionality of graph, report and info commands as of now.

Limitations

It can trace a native C/C++ application on Linux.It cannot trace already running process.It cannot be used for system-wide tracing.It supports x86 (32 and 64 bit), ARM (v6 or later) and AArch64 for now.

License

The uftrace program is released under GPL v2. See COPYING file for details.

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。