我在T61上安装Solaris的全过程

网友投稿 924 2022-09-25

我在T61上安装Solaris的全过程

我在T61上安装Solaris的全过程

毕业四年,一直在windows下做开发,来到了这家公司工作,总被一些使用命令行的家伙笑话,他们号称是unix高手,所以,决定学习一下unix, 查了一下,公司用的unix是Sun Solaris. 决定在自己家的机器上安装一个Sun Solaris. 下面详细的叙述一下安装的步骤,

1. 去网站-安装文件,所以,我-了CD版的,CD版共有5个ISO。

2. 把这5个ISO分别刻录到5个CD盘上。安装盘准备好了,开始安装系统。

3. 我的机器上原来安装有Windows XP,所以,我要安装双系统在我的机器上。在Solaris的安装过程,只能识别windows下的C盘(Primary Disk),其他所有逻辑盘和未用空间都被认为是一块可以安装Solaris的空闲区,所以,我只好把所有除了C盘以外所有的空间都备份。

3. 开始安装Solaris. 重启机器,进入bios, 设置从光驱启动,重启。

4.进入安装程序,选择安装的界面语言和决定其他一些选项,然后,开始选择图形界面还是文本界面,建议选择图形界面,然后继续。

5.选择了图形界面就容易得多了,图形界面和安装Windows基本差不多。但是应该注意有一些选项。

1). 在输入网络用户名的时候,一定不要有特殊字符,例如,-.

2). 安装程序询问是1. Standard 2. Customize, 一定要选择2. Customize, 否则,标准安装将会跳过第3,4张盘, JDS就不会被默认安装。

3). 选择哪些软件组被安装。请选择The whole group plus OEM. 类型选择Default和Customize, 最好选择Customize, 然后确认所有的程序都被选择。这个原因和第2)个是一样的。不知道是不是安装程序的一个Bug.

6. 然后,重启机器,默认进入得图形界面JDS/CDE。

7. 打开一个命令行终端,执行命令,ifconfig -a, 如果,只有lo0, 那说明网卡驱动没有安装。

8. 然后,我找的我得网卡是BROADCOM 4401, 打开了Sun HCL: border="0" cellpadding="0" cellspacing="1" style="margin-left: 13.45pt; width: 100%" width="100%">

  42. Broadcom  
Networking: 10/100 Ethernet
On-Board

这就是我的网卡,打开描述-后,解压,是驱动的源程序和make程序,里面有一个文件,Readme, 按照里面的步骤安装网卡驱动,然后,并按照其步骤配置。

10. 重启机器,重启后,就可以上网了。All of the configuration about net.# cat /etc/hostname.bfe0robert# cat /etc/resolv.confnameserver 192.168.0.1# cat /etc/inet/hosts## Internet host table#192.168.0.101   localhost       loghost robert  # Added by DHCP# cat /etc/inet/netmasks128.32.0.0 255.255.255.0# cat /etc/nsswitch.conf## Copyright 2006 Sun Microsystems, Inc.  All rights reserved.# Use is subject to license terms.### /etc/nsswitch.dns:## An example file that could be copied over to /etc/nsswitch.conf; it uses# DNS for hosts lookups, otherwise it does not use any other naming service.## "hosts:" and "services:" in this file are used only if the# /etc/netconfig file has a "-" for nametoaddr_libs of "inet" transports.# DNS service expects that an instance of svc:/network/dns/client be# enabled and online.passwd:     filesgroup:      files# You must also set up the /etc/resolv.conf file for DNS name# server lookup.  See resolv.conf(4).hosts:      files dns# Note that IPv4 addresses are searched for in all of the ipnodes databases# before searching the hosts databases.ipnodes:   files dnsnetworks:   filesprotocols:  filesrpc:        filesethers:     filesnetmasks:   filesbootparams: filespublickey:  files# At present there isn't a 'files' backend for netgroup;  the system will#   figure it out pretty quickly, and won't use netgroups at all-group:   filesautomount:  filesaliases:    filesservices:   filesprinters:       user filesauth_attr:  filesprof_attr:  filesproject:    filestnrhtp:     filestnrhdb:     files# cat /etc/dhcp.bfe0

可以参考的贴子和文章, http://topic.csdn-/u/20080527/09/924711f6-f90a-4275-98bc-e1cebbfe947c.html http://topic.csdn-/u/20080526/11/cbeec951-beef-4a45-977e-741250070f55.html http://topic.csdn-/u/20080518/13/725deb59-7d60-48e3-8c1a-99ebbaaf96a5.html http://blog.csdn-/yayong/archive/2005/04/10/341755.aspx http://chinaunix-/jh/6/16562.html 这里有一篇官方文档, http://sun.com/software/solaris/howtoguides/installationhowto.jsp#1 Please see the installation FAQ in Chinese, http://wiki.gceclub.sun.com-/index.php/OpenSolaris/Solaris%E4%B8%AD%E6%96%87FAQ#OpenSolaris.E5.92.8CSolaris.E7.9A.84.E5.8C.BA.E5.88.AB.3F Please see the item about network adaptor not found. http://wiki.gceclub.sun.com-/index.php/%E5%AE%89%E8%A3%85Solaris_X86%E4%B8%8D%E8%83%BD%E8%AF%86%E5%88%AB%E7%BD%91%E5%8D%A1%E6%80%8E%E4%B9%88%E5%8A%9E%EF%BC%9F

版权声明:本文内容由网络用户投稿,版权归原作者所有,本站不拥有其著作权,亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容,请联系我们jiasou666@gmail.com 处理,核实后本网站将在24小时内删除侵权内容。

上一篇:你的营销闭环就这4个版块!(营销闭环什么意思)
下一篇:Unix command coloring
相关文章

 发表评论

暂时没有评论,来抢沙发吧~