处理HP-UNIX面板灯报警及配置MP

网友投稿 586 2022-09-24

处理HP-UNIX面板灯报警及配置MP

HP rs6600面板左侧第2、3个等有桔灯告警一、查看报警日志 #/usr/sbin/diag/contrib/slview -f /var/stm/logs/os/fp1.log.00 >a >3 二、处理报警日志小机告警灯闪烁桔×××说明MP日志里面有3级告警，告警日志被读过以后告警等就会自动消失 1、通过串口连接主机与控制终端（如果没有控制终端可以找一个带串口的笔记本，通过串口线连接主机的console口）超级终端速率设置为9600。注意：根据需要设置超级终端属性->设置->功能键、箭头键和ctrl健用作其它默认 2、连接以后按ctrl+b切换到MP，默认用户名和密码是Admin/Admin ************************************************************************* This is a private system. Do not attempt to login unless you are an authorized user. Any authorized or unauthorized access or use may be monitored and can result in criminal or civil prosecution under applicable law. ************************************************************************* MP login: Admin MP password: ************* Hewlett-Packard Integrated Lights-Out HP Integrity (c) Copyright Hewlett-Packard Company 1999-2006. All Rights Reserved. MP Host Name: rx660001 Revision F.01.58 MP MAIN MENU: CO: Console VFP: Virtual Front Panel CM: Command Menu SMCLP: Server Management Command Line Protocol CL: Console Log SL: Show Event Logs HE: Main Help Menu X: Exit Connection [rx660001] MP> sl Event Log Viewer Menu: Log Name Entries % Full Latest Timestamped Entry --------------------------------------------------------------------------- E - System Event 226 30 % 15 Feb 2008 02:06:59 F - Forward Progress 4000 100 % B - Current Boot 114 38 % P - Previous Boot 114 38 % C - Clear All Logs L - Live Events Enter menu item or [Ctrl-B] to Quit: e Log Name Entries % Full Latest Timestamped Entry --------------------------------------------------------------------------- E - System Event 225 30 % 13 Nov 2007 09:05:10 Event Log Navigation Help: + View next block (forward in time, e.g. from 3 to 4) - View previous block (backward in time, e.g. from 3 to 2) Continue to the next or previous block D Dump the entire log F First entry L Last entry J Jump to entry number H View mode configuration - Hex K View mode configuration - Keyword T View mode configuration - Text A Alert Level Filter options U Alert Level Unfiltered ? Display this Help menu Q Quit and return to the Event Log Viewer Menu Ctrl-B Exit command, and return to the MP Main Menu MP:SL (+,-,,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to Quit) > # Location|Alert| Encoded Field | Data Field | Keyword / Timestamp ------------------------------------------------------------------------------- 224 OSA 2 0x21473968C6021340 FF0F066F001F0300 BOOT_FINISHED 13 Nov 2007 09:05:10 223 SFW 0 2 0x40801CBB00E01320 0000000000000000 BOOT_SWITCH_INSECURE_MODE 13 Nov 2007 09:03:23 222 SFW 0 0 0x548002C500E01300 0000000000000000 BOOT_REBOOT 13 Nov 2007 09:02:44 221 BMC 2 0x20473968270212F0 FFFF027000120300 SOFT_RESET 13 Nov 2007 09:02:31 220 OSA *7 0x21473967C20212E0 FF0F016F00200300 OS_CRITICAL_SHUTDOWN 13 Nov 2007 09:00:50 219 SFW 6 *7 0xF480007906E012C0 0000000000000006 INIT_INITIATED 13 Nov 2007 09:00:48 218 SFW *7 0xC1473967C00212B0 003FA36F00130300 INIT_INTERRUPT_INITIATED 13 Nov 2007 09:00:48 217 SFW 4 *7 0xF480007904E01290 0000000000000004 INIT_INITIATED 13 Nov 2007 09:00:48 216 SFW *7 0xC1473967C0021280 003FA36F00130300 INIT_INTERRUPT_INITIATED 13 Nov 2007 09:00:48 MP:SL (+,-,,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to Quit) > ..... 日志读取完毕后，报警消除三、为了管理方便配置 MP lan [rx660001] MP> cm (Use Ctrl-B to return to MP main menu.) 1、将DHCP Status改为disabled，只有将其改为disabled我们才可以修改ip [rx660001] MP:CM> lc LC At each prompt you may type DEFAULT to set default configuration or Q to Quit Current LAN Configuration: - - MAC Address : 0x0014c29c3755 D - DHCP Status : Enabled - - IP Address : 0.0.0.0 M - MP Host Name : rx660001 - - Subnet Mask : 0.0.0.0 - - Gateway Address : 0.0.0.0 L - Link State : Auto Negotiate W - Remote Serial Console Port : 2023 H - SSH Access Port : 22 - - IPMI / LAN Port : 623 Enter parameter(s) to change, A to modify All, or [Q] to Quit: d d For each parameter, enter: New value, or to retain the current value, or DEFAULT to set the default value, or Q to Quit DHCP Status: D - Disabled Current -> E - Enabled (default) Modifying this parameter will cause all present LAN and Web connections to be dropped. Enter new value, or Q to Quit: d d -> DHCP Status will be updated New LAN Configuration (* modified values): - - MAC Address : 0x0014c29c3755 * D - DHCP Status : Disabled * I - IP Address : 127.0.0.1 M - MP Host Name : rx660001 * S - Subnet Mask : 255.255.255.0 * G - Gateway Address : 127.0.0.1 L - Link State : Auto Negotiate W - Remote Serial Console Port : 2023 H - SSH Access Port : 22 - - IPMI / LAN Port : 623 -> Check all LAN parameters to ensure they are correct before commit. -> All LAN and Web connections will be dropped if you confirm the changes. Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: i y y -> LAN Configuration has been updated. -> Reset MP (XD command option 'R') for configuration to take effect. 2、配置IP，subnet mask，gateway [mp0014c29c370f] MP:CM> lc LC At each prompt you may type DEFAULT to set default configuration or Q to Quit Current LAN Configuration: - - MAC Address : 0x0014c29c370f * D - DHCP Status : Disabled * I - IP Address : 127.0.0.1 M - MP Host Name : mp0014c29c370f * S - Subnet Mask : 255.255.255.0 * G - Gateway Address : 127.0.0.1 L - Link State : Auto Negotiate W - Remote Serial Console Port : 2023 H - SSH Access Port : 22 -> Check all LAN parameters to ensure they are correct before commit. -> All LAN and Web connections will be dropped if you confirm the changes. Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: i i For each parameter, enter: New value, or to retain the current value, or DEFAULT to set the default value, or Q to Quit IP Address: Current -> 0.0.0.0 127.0.0.1 (default) Modifying this parameter will cause all present LAN and Web connections to be dropped. Enter new value, or Q to Quit: 192.168.131.241 192.168.131.241 -> IP Address will be updated New LAN Configuration (* modified values): - - MAC Address : 0x0014c29c370f * D - DHCP Status : Disabled + I - IP Address : 192.168.131.241 M - MP Host Name : mp0014c29c370f + S - Subnet Mask : 255.255.255.0 + G - Gateway Address : 127.0.0.1 L - Link State : Auto Negotiate W - Remote Serial Console Port : 2023 H - SSH Access Port : 22 + indicates inconsistent parameters Enter parameter(s) to revise, or [Q] to Quit: s s For each parameter, enter: New value, or to retain the current value, or DEFAULT to set the default value, or Q to Quit Subnet Mask: Current -> 0.0.0.0 255.255.255.0 (default) Modifying this parameter will cause all present LAN and Web connections to be dropped. Enter new value, or Q to Quit: 255.255.0.0 255.255.0.0 -> Subnet Mask will be updated New LAN Configuration (* modified values): - - MAC Address : 0x0014c29c370f * D - DHCP Status : Disabled + I - IP Address : 192.168.131.241 M - MP Host Name : mp0014c29c370f + S - Subnet Mask : 255.255.0.0 + G - Gateway Address : 127.0.0.1 L - Link State : Auto Negotiate W - Remote Serial Console Port : 2023 H - SSH Access Port : 22 + indicates inconsistent parameters Enter parameter(s) to revise, or [Q] to Quit: g g For each parameter, enter: New value, or to retain the current value, or DEFAULT to set the default value, or Q to Quit Gateway Address: Current -> 0.0.0.0 127.0.0.1 (default) Enter new value, or Q to Quit: 192.168.131.1 192.168.131.1 -> Gateway Address will be updated New LAN Configuration (* modified values): - - MAC Address : 0x0014c29c370f * D - DHCP Status : Disabled * I - IP Address : 192.168.131.241 M - MP Host Name : mp0014c29c370f * S - Subnet Mask : 255.255.0.0 * G - Gateway Address : 192.168.131.1 L - Link State : Auto Negotiate W - Remote Serial Console Port : 2023 H - SSH Access Port : 22 -> Check all LAN parameters to ensure they are correct before commit. -> All LAN and Web connections will be dropped if you confirm the changes. Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: y y -> LAN Configuration has been updated. -> Reset MP (XD command option 'R') for configuration to take effect. 3、检查MP Lan状态 [rx660001] MP:CM> ls LS Current LAN Configuration: MAC Address : 0x0014c29c3755 DHCP Status : Disabled IP Address : 192.168.131.240 MP Host Name : rx660001 Subnet Mask : 255.255.0.0 Gateway Address : 192.168.131.1 Link State : Auto Negotiate Remote Serial Console Port : 2023 SSH Access Port : 22 IPMI / LAN Port : 623 LAN status: UP and RUNNING 备注：虽然这提示LAN status: UP and RUNNING，我们仍然需要对 MP进行重启，否则网络无法ping通。 4、开启远程访问 SA This command allows you to modify MP access configuration. Current Set Access Configuration: T - Telnet : Enabled W - Web SSL : Enabled H - SSH : Enabled I - IPMI over LAN : Disabled C - Command Mode : MP Menu Enter parameter(s) to change, A to modify All, or [Q] to Quit: I I For each parameter, enter: New value, or to retain the current value, or DEFAULT to set the default value, or Q to Quit IPMI over LAN Port Access Configuration: Current -> D - Disabled (default) E - Enabled Enter new value, or Q to Quit: e e -> IPMI over LAN Port Access Configuration will be updated New Set Access Configuration (* modified values): T - Telnet : Enabled W - Web SSL : Enabled H - SSH : Enabled * I - IPMI over LAN : Enabled C - Command Mode : MP Menu Warning: enabling IPMI over LAN will allow an anonymous user login (an IPMI user with null name and password). To secure access please set the password of the null user using an IPMI tool. Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: y y -> Set Access Configuration has been updated. 5、重启MP [mp0014c29c370f] MP:CM> XD XD Diagnostics Menu: Non destructive tests: P - Parameter checksum I - I2C access (get BMC Device ID record) L - LAN access (PING) H - History Destructive tests: R - Restart MP Enter menu item or [Q] to Quit: R R Confirm? (Y/[N]): Y Y MP is now being reset... 测试到网关的连通性 [mp0014c29c370f] MP:CM> xd XD Diagnostics Menu: Non destructive tests: P - Parameter checksum I - I2C access (get BMC Device ID record) L - LAN access (PING) H - History Destructive tests: R - Restart MP Enter menu item or [Q] to Quit: l l Enter IP Address: 192.168.131.1 192.168.131.1 64 bytes received from 192.168.131.1 -> Test result: PASS to continue... 网络联通，远程维护ok了。 6、接下来修改密码 ************************************************************************* This is a private system. Do not attempt to login unless you are an authorized user. Any authorized or unauthorized access or use may be monitored and can result in criminal or civil prosecution under applicable law. ************************************************************************* MP login: Admin MP password: ************* Hewlett-Packard Integrated Lights-Out HP Integrity (c) Copyright Hewlett-Packard Company 1999-2006. All Rights Reserved. MP Host Name: rx660001 Revision F.01.58 MP MAIN MENU: CO: Console VFP: Virtual Front Panel CM: Command Menu SMCLP: Server Management Command Line Protocol CL: Console Log SL: Show Event Logs HE: Main Help Menu X: Exit Connection [rx660001] MP> cm (Use Ctrl-B to return to MP main menu.) [rx660001] MP:CM> uc UC This command allows you to modify the user configuration. User Configuration Menu: L - List current users N - Add a New user C - Change a current user D - Delete a current user Enter menu item or [Q] to Quit: c c Current User Configuration: Login ID User Name Access Rights Enabled -------------------------------------------------------------------------- 1 - Admin Default Admin C, P, M, U, V Yes 2 - Oper Default Operator C, V Yes Select User to modify by number, or [Q] to Quit: 1 1 Current User Parameters: L - User Login ID : Admin P - User Password : ************ U - User Name : Default Admin W - User Workgroup : R - User Access Rights : Console access, Power control, MP configuration, User administration, Virtual Media - - User Operating Mode : Multiple - - User Enabled/Disabled : Enabled Enter parameter(s) to change, A to modify All, or [Q] to Quit: p p For each parameter, enter: New value, or to retain the current value, or Q to Quit User Password: 6-24 characters to retain current password Enter New Password: 修改密码后会自动断开连接

发表评论

暂时没有评论，来抢沙发吧~

处理HP-UNIX面板灯报警及配置MP

最近发表

更多内容

小程序SDK

Finclip技术文档

小程序开发

小程序容器

小程序框架

Finclip小程序平台

Finclip用户投稿

车联网

推荐文章

小程序SDK是什么意思？小程序sdk和插件有什么区别？

小程序支付功能怎么实现？

企业app开发流程是什么？

app运营模式有哪些？

小程序多端引流怎么做？

小程序生态分析的机会和威胁

Flutter入门这一篇效率文章就够了

原生与跨平台解决方案分析,跨平台软件开发技术方案

热更新技术：让软件更新变得更加轻松快速

解决方案

银行解决方案

证券解决方案

互联网解决方案

政企OA解决方案

科技解决方案

loT解决方案

信任解决方案

热评文章

AppCan:基于混合模式的移动应用开发,移动混合模

Hybrid App混合模式开发的了解

小程序容器技术助力券商数字营销突围，小程序容器化的意

用mpvue开发微信小程序基础知识（vue.js开发

小程序多端框架全面测评对比，强烈推荐！

开放银行银行案例，迎接金融创新的未来